Additional Maker Equipment

Brand/Model: American Button Machines 1.5" button and magnet maker

Design: Files for use with the button maker can be created using any software. Designs should be roughly 2" x 2" in size and printed on regular paper. The design can then be cutout using the 1.837" circle punch provided with the button maker.

Required Materials: 

• Button/magnet shell
• Clear mylar
• Pinback or magnet-back
• Button materials are available for purchase. Everything for five 1.5" buttons for $1.00. Everything for three 1.5" magnets for $1.00.

Additional Information: 

• The button maker also makes 1.5" magnets. Magnet supplies include a shell, clear mylar, un-pinned back, and peel-n-stick magnet. Materials for magnets are available for purchase at the Library at three sets for $1.00.
• Click here for button maker instructions, or visit American Button Machines' Button University for button design templates and guides on how to make a button.

Brand/Model: American Button Machines 2.25" button maker

Design: Files for use with the button maker can be created using any software. Designs should be roughly 2.75" x 2.75" in size and printed on regular paper. The design can then be cutout using the 2.625" circle punch provided with the button maker.

Required Materials: 

• Button shell
• Clear mylar
• Pinback
• Button materials are available for purchase. Everything for five 2.25" buttons for $1.00. Everything for three 2.25" magnets for $1.00.

Additional Information: 

• The button maker also makes 2.25" magnets. Magnet supplies include a shell, clear mylar, un-pinned back, and peel-n-stick magnet. Materials for magnets will be available for purchase at the Library in the near future.
• Click here for button maker instructions, or visit American Button Machines' Button University for button design templates and guides on how to make a button.

Dimension: 13.2" x 9.25" x 0.14"

Features:

• LED light pad tablet for tracing with three brightness settings
• USB connections
• Paper-holder clamp

Additional Information: User must supply their own tracing paper. Tracing paper is not available at the Library.

The 15" x 15" standing heat press is out of order until further notice. 

Brand/Model: Starcraft 15" Heat Press

Maximum Heat Area: 15" x 15"

Attachments: 

• Standard 15” x 15” platen (plate), swing design
• Hat Press
• Plate Press #1 - 5" Max Diameter
• Plate Press #2 - 6" Max Diameter
• Mug Press Base Attachment
• Mug Press 9 oz
• Mug Press 11 oz
• Mug Press Cone 12 oz
• Mug Press Cone 17 oz

Materials Available for Use with the Heat Press: 

• Teflon sheets
• Teflon pillows
• Silicone mat
• Heat tape
• Scissors
• Heat-resistant gloves

Additional Information: The heat press is available on a first come, first serve basis, unless reserved for use with the sublimation printer. The heat press must be checked out from The Hive service desk and is available for use in The Hive only.

Brand/Model: HPN Signature Series 7-in-1 Automated Sublimation Mug and Tumbler Press

This heat press has seven different sized sleeves for drinkware ranging from an espresso mug, all the way to a 30 ounce Skinny Tumbler. This tumbler press is used primarily for sublimation and heat transfer vinyl. The tumbler press produces heat up to 415 degrees Fahrenheit and has a built-in timer with alarm to signal when a heat cycle completes.

Attachments: 

• Mini Shot Glass Attachment - 1.5 oz
• Espresso Mug Attachment - 2.5 oz
• Water Bottle Attachment - 6 oz / 12 oz
• Mug Attachment - 11 oz / 15 oz 
• Latte Mug Attachment - 12 oz 
• Latte Mug Attachment - 17 oz
•  Skinny Tumbler Attachment - 16 / 20 / 30 oz

Materials Available for Use with the Tumbler Press: 

• Paper
• Heat tape
• Scissors
• Heat-resistant gloves

Additional Information: The Signature Series 7-in-1 Tumbler Press is available for use in the makerspace on a first come, first serve basis. 

Click here to reserve the Tumbler Heat Press

Brand/Model: Cricut EasyPress 2 - For use with heat transfer vinyl on a variety of fabrics.

Maximum Heat Area: 12" x 10"

Materials Available for Use with the EasyPress:

• EasyPress mat
• Safety base

Additional Information:

• The Cricut EasyPress is available on a first come, first serve basis. The EasyPress must be checked out from The Hive service desk and is available for use in The Hive only.
• Not sure what heat setting to use for your materials? Visit cricut.com/heatguide.